Screws Maag instruments

Guide wire

Filo-guida

Code
4.280.000

Is inserted to monitor and identify with appropriate radioscopic controls the correct installation position of implant.


 

Exchange

trocar

Code

If required it can be used for the initial incision of the bone tissue and as a guide for subsequent operations


 

Protector /guide

protettore-guida

Code

It is normally used to protect the soft tissues because all cutting tools working coaxially and should come into direct contact only with the bone tissue


 

Cannulated burr

Frangi-corticale

Code
4.800.001

If required it is used to create the seat in hemispheric cortical and sink the screw head


 

Helical drill

Fresa-cannulata

Code
4.500.002

Creates the channel for screw insertion. Normally its diameter is equal to that of the cylindrical portion of the screw


 

Caliber

calibro

Code
4.280.003

Determines the correct screw length to use


 

Cannulated screwdriver

Cacciavite-cannulato

Code
4.800.004

Screw the device into the seating created. As with all cutting tools discussed previously, this is done following the guidewire which must be removed only after the final positioning of the device


 

Multiple guide

Guida-multipla

Code
4.280.005

In case you must insert two or more devices it is used to check the mutual position, to ensure the parallelism and avoid mutual interference


 

Injection Kit

kit-iniezione

Code

The injection kit is composed of a cannulated, closed ended needle, which has a series of holes arranged in correspondence with those on the cylindrical portion of the MAAG screw.
The mechanical means to provide the necessary pressure to the injection syringe is equipped with a quick charge, ergonomic knob to micro feed and plug bayonet point.
The needle can be connected directly to the syringe by means of a Luer-Lock or, for convenience of use, by interposing a flexible tube fitted with a Luer-Lock male / female