Technical features EasyShort® system
Inside the neck of the fixture is an octagonal seating, followed by a tapered section.
This seating is used for the engagement of the prosthetic components and it is standard for all types of EasyShort® fixtures. The conical coupling gives stability to the implant-abutment connection while the octagonal portion prevents rotation. On the bottom of the connection there is an M2 threaded hole that allows to tighten the abutment to the implant thorough a fastening screw.
For an optimal and rapid osseointegration, the implant surface is treated by a special shot peening process. This process is carried out with white corundum, specific to the medical field, with constant pressure and particle size. Subsequently, the threaded portion of the fixture is subjected to a chemical etching treatment.
Live studies and histological analysis have confirmed that the surface treatments performed on EasyShort® systems are able to speed up the osseointegration process and thus to reduce the time of bone neogenesis.
The cortical micro-threading allows optimal osseointegration and minimal ridge shrinkage. The surgical protocol involves the use of the countersink drill to allow for an ideal accommodation of the micro-threaded neck.
The three longitudinal slots collect the bone fragments obtained from the action of the cutters.
During screwing they allow the redistribution of the fragments along the lower portion of the implant.
The implant is designed to adapt to the characteristics of the bone tissue into which it is implanted.