• Home
  • /CAD CAM Prosthetic components

CAD CAM Prosthetic components

Scan Abutments are made in sandblasted alluminium  to avoid the use of matted spray during scanning. Titanium bases and premilled are made of Grade 5 titanium (Ti6AI4V) and must be tighten to 30 N*cm using the torque ratchet wrench ELPSK1 or ELPSK2  with the torque ratchet ELKWD. The fastening screw is included in the packaging.

Scan abutment for implant or analogue

Code For implant platform
SCANCC Ø 4.25 e 4.8 mm

 

Scan abutment for MUA

Code For implant platform
SCANMUACC Ø 4.25 e 4.8 mm

 

Scan abutment for ELMEO

Code For implant platform
SCANELMEO Ø 4.25 e 4.8 mm

 

Titanium base

Code Type For implant platform
EDBSEZR Cylindrical antirotational for zirconia Ø 4.25 mm
ENBSEZR Cylindrical antirotational for zirconia Ø 4.8 mm
EDBSECRCO Cylindrical antirotational for Cr-co Ø 4.25 mm
ENBSECRCO Cylindrical antirotational for Cr-co Ø 4.8 mm
EDBSCZR Conical rotational for zirconia Ø 4.25 mm
ENBSCZR Conical rotational for zirconia Ø 4.8 mm
EDBSCCRCO Conical rotational for Cr-Co Ø 4.25 mm
ENBSCCRCO Conical rotational for Cr-Co Ø 4.8 mm

 

Premilled

Codie Ø mm For implant platform
EDPMCC08 Ø 8 mm Ø 4.25 mm
ENPMCC08 Ø 8 mm Ø 4.8 mm
EDPMCC14 Ø 14 mm Ø 4.25 mm
ENPMCC14 Ø 14 mm Ø 4.8 mm